nylon 1010
英
美
【化】尼龙1010，聚癸二酰癸二胺
双语例句
- Crystallization Behavior of Dispersible Nano-SiO_2/ Nylon 1010 Composites
可分散性纳米SiO2/尼龙1010复合材料的结晶行为 - Structure and Properties of Nylon 1010 Modified by Using Ethylene-Vinyl Acetate Rubbers and Inorganic Fillers
乙烯&醋酸乙烯酯橡胶和无机填料改性尼龙1010的结构与性能研究 - The Design and Process Test for Injection Mold with Hot Runner for the Production of Nylon 1010 Caps
尼龙1010圆盒盖热流道注塑模热喷嘴的设计及工艺试验 - Glass fiber reinforced nylon 1010 resin
玻璃纤维增强尼龙1010树脂 - Crystallization and Melting Behavior of PPTA/ Nylon 1010 Molecular Composites
PPTA/尼龙1010分子复合材料的结晶与熔化行为 - The automobile spline shaft coated with nylon 1010/ graphite graded composites was developed.
制备了尼龙1010/石墨梯度材料涂覆汽车花键轴。 - Thermal properties and morphology of crystal in Nylon 1010 formed isothermally at melting peak temperature were studied through DSC, TEM and ED.
用DSC、TEM、ED研究了尼龙1010在熔融峰温等温结晶生成晶体的热性质和形态结构。 - The results show that the nylon 1010 exhibits an indentation size effect on nano-hardness and elastic modulus.
研究结果表明，尼龙1010的纳米硬度和弹性模量呈现出明显的尺寸效应，尼龙1010的纳米动态力学性能具有明显的黏弹性。 - A micro injection machine was used to prepare all the specimens of nylon 1010 and carbon fiber ( CF) reinforced nylon 1010 composites. The effects of various loads on the tribological properties and wear mechanism of composites were investigated.
以注塑成型法制备了尼龙1010及碳纤维（CF）增强尼龙1010复合材料，研究了CF含量和载荷对材料摩擦学性能和磨损机制的影响。 - The Relation between Crystallinity and Wear-Resistance of PF Nylon I and Nylon 1010
PF尼龙Ⅰ号和尼龙1010的结晶度与抗磨性能关系的研究 - Kinetic model of chain extension reaction of nylon 1010 and analysis of experimental results
尼龙1010扩链反应的动力学模型和分析 - The coating process and coat properties were discussed. The bench test and riding test on the coated spline shaft were carried out. And the properties of nylon 1010/ graphite coated spline shaft were compared with those of nylon 11 coated spline shaft.
考察了其涂装工艺和涂层性能，进行了涂覆花键轴的台架试验和道路行驶试验，并与尼龙11涂覆花键轴进行对比。 - The cold crystallization and melting of nylon 1010 samples quenched in rate of-320K/ min have been studied in different heating rates ( R) by DSC.
本文用DSC研究了尼龙1010熔体以&320K/min速率骤冷样品在不同升温速率（R）时的冷结晶与熔融过程。 - The morphology and properties of injection-molded nylon 1010
注射成型条件下尼龙1010的形态结构与性能的研究 - The progress on the crystallization process and kinetics, crystal melting and transformation, properties such as dilute solution property, thermal degradation and dynamic mechanical property of nylon 1010 and its modifications by copolymerization, blending, grafting, filling, reinforcing and cross linking are reviewed.
本文介绍了尼龙1010的结晶过程与动力学、晶体的熔融与转化；并论述了其稀溶液、热降解与动态力学性质及共聚、共混、填充、增强、交联改性方面的研究进展。 - The abrasion, impact and adhesion test was conducted with nylon 1010 coating.
对尼龙1010涂层做了磨耗、冲击和附着力试验。 - The effect of gamma-irradiation on the state of aggregation of nylon 1010 was studied by using WAXD and DSC techniques.
本文通过WAXD和DSC等方法研究了γ-辐照尼龙1010聚集态结构的变化，结晶损伤和无定形化的过程。 - The tribological properties of graphite and carbon fiber reinforced nylon 1010 composites in water and air conditions
不同条件下石墨和炭纤维增强尼龙复合材料的摩擦学特性 - The properties and applications of long carbon chain nylon were introduced. Development of long carbon chain Nylon including Nylon 11, Nylon 12, Nylon 1010, Nylon 1212, Nylon 612 were mainly summarized.
介绍了长碳链尼龙的性能及应用，重点概述了包括尼龙11、尼龙12、尼龙1010、尼龙1212、尼龙612等长碳链尼龙的研究及发展情况。 - The melting process of the isothermal crystallizing film samples of Nylon 1010 from the melt have been studied by DSC.
本文用DSC研究了等温熔体结晶尼龙1010薄膜试样的熔融。 - Studyes on the mechanical properties and crystalline behaviours of ppta/ nylon 1010 molecular composite
PPTA/尼龙1010分子复合材料力学性能及结晶行为的研究 - The results show that CF can considerably improve the tribological properties of nylon 1010 composites and 20 vol.
结果表明，CF的加入可显著改善尼龙的摩擦学性能，以体积分数为20%的CF增强尼龙1010复合材料的耐磨性能最好。 - Crystallizing and melting behaviours of nylon 1010
尼龙1010结晶与熔融行为的研究 - Studies on the Rheological Behaviors of PPTA/ Nylon 1010 Molecular Composite
PPTA/尼龙1010分子复合材料流变行为的研究 - Study on the Thermal Oxidation Degradation Process and Kinetics of Nylon 1010
尼龙1010热氧降解过程与动力学研究 - Fabrication and Performance of MPS Modified Tremolite/ Nylon 1010 Composite
MPS修饰透闪石/尼龙1010复合材料的制备与性能 - The isothermal crystallization behaviors of nylon 1010 with different molecular weights were studied by DSC in this paper. Within the studied temperature scope, the isothermal crystallization behavior of nylon 1010 can be described by Avrami equation.
用示差扫描量热法（DSC）研究了3种不同分子量的尼龙1010样品的等温结晶行为，在所研究的温度范围内，尼龙1010的等温结晶过程符合Avrami方程。 - The influence of the mechanical properties of flame sprayed nylon 1010/ nanometer TiO_2 coatings were studied by universal testing instruments.
利用电子拉力机探讨了纳米TiO2对火焰喷涂尼龙1010涂层力学性能的影响。 - The effects of cooling rate ( R) with crystallizing and melting behaviours of nylon 1010 and the melting of its samples which were quenched from melt at room temperature ( RT) and liquid N2 ( LN) and then annealed have been studied by DSC.
用DSC研究了降温速率R对尼龙1010结晶与熔融的影响，以及室温（RT）和液氮（LN）骤冷退火样品的熔融。 - POSS increased the integral procedure decomposition temperature and char yield at 800 oC of nylon 1010.
POSS能在一定程度上提高尼龙1010的积分程序分解温度和800oC时的残炭量。